LORDS OF LIGHT
Art & Craft

LORDS OF LIGHT

Lets Fevicreate a quirky lamp using the photo transfer technique, its easy , simple and so beautiful.  

Mixed Media Gifting 30 to 60 mins 9 to 14 years Art & Craft Class 6

Materials Needed

img
image

Steps to Create this Activity

Login to see steps

Step - 01

To create lamp, take an ohp sheet and draw the template given with the help of scale and felt pen

Step - 02

Now take some printouts of good quality. Using scissors, cut the printouts according to diagram made on OHP sheet. Using Fine Art Brush apply a uniform layer of Fevicol A+ on the printed side. Now stick it on the OHP sheet as shown. Let it dry for approximately 2 hours.

Step - 03

Sprinkle some water on the back side of the print to make the surface wet. Now softly scrub out the upper layer of paper with your hand or sponge over the print. The print will be transferred giving a translucent effect with the print on the OHP sheet.

Step - 04

With the help of scale and paper cutter fold the flaps as shown.

Step - 05

Using Glue Drops seal the edges as shown

Step - 06

Using compass , create hole above and tie thick cobbler cord as shown. Your lamp is ready!

Steps to Create this Activity

Login to see steps

Step - 01

To create lamp, take an ohp sheet and draw the template given with the help of scale and felt pen

Step - 02

Now take some printouts of good quality. Using scissors, cut the printouts according to diagram made on OHP sheet. Using Fine Art Brush apply a uniform layer of Fevicol A+ on the printed side. Now stick it on the OHP sheet as shown. Let it dry for approximately 2 hours.

Step - 03

Sprinkle some water on the back side of the print to make the surface wet. Now softly scrub out the upper layer of paper with your hand or sponge over the print. The print will be transferred giving a translucent effect with the print on the OHP sheet.

Step - 04

With the help of scale and paper cutter fold the flaps as shown.

Step - 05

Using Glue Drops seal the edges as shown

Step - 06

Using compass , create hole above and tie thick cobbler cord as shown. Your lamp is ready!